2K WATERBORNE EPOXY ZINC-RICH PRIMER
PRODUCT DESCRIPTION
This is a two-component water-borne zinc-rich primer based on epoxy resin and zinc powder.
FEATURES & APPLICATION
Good corrosion resistance and high build application;
Excellent resistance to abrasions and impacts;
Excellent compatibility with water-borne epoxy coats and offer long-term protection;
Environment-friendly, without solvent, no danger of fire.
This primer can be used on many types of surfaces, especially suitable for metal surfaces, such as:
Steel surfaces: It's suitable for bridges, ships, automobiles, and heavy machinery, etc.
Galvanized metals: It's applicable to various galvanized surfaces to enhance corrosion resistance.
Aluminum materials: It also provides good protection on aluminum surfaces.
Concrete and masonry: In certain cases, with proper treatment and priming, it can also be used on these surfaces.
Before use, one should follow the detailed instructions in the product manual and technical data sheet to ensure optimal primer performance. Some surfaces might require special pre-treatment or a special primer formulation.
PRODUCT PICTURES
|
|
Front | Back |
APPLICATION AREAS
|
|
|
|
Substations | Substations | Transmission line | Transmission line |
APPLICATION GUIDANCE
| Application Condition | The temperature is between -5℃~35℃ during application. | ||||
| Mixing | Combine Base with Hardener, mix thoroughly with power agitator. | ||||
| Pot life | 5℃ | 10℃ | 20℃ | 30℃ | |
| 5hrs | 4hrs | 3hrs | 2hrs | ||
| Application methods | Recommended use airless spray: | ||||
| Thinner | Water | ||||
| Drying time | Temperature | 5℃ | 10℃ | 20℃ | 30℃ |
| Surface dry | 3hr | 2hr | 60min | 30min | |
| Touch dry | 24hrs | 18hrs | 12hrs | 8hrs | |
| Min.interval | 12hrs | 6hrs | 4hrs | 3hrs | |
| Max.interval | 7d | 7d | 7d | 7d | |
| The given data is considered for reference only; the actual drying time will be changed generally related to air circulation, temperature, film thickness and the number of coats. | |||||
| Drying condition | Air-drying, keep good ventilation in closed environment for normal drying. | ||||
| Applied substrate | Bare steel | ||||
| Typical topcoat | SFXSX-04 Waterborne epoxy intermediate coat paint for transformers | ||||
| Storage temperature | Transport should be maintained at 5~35℃ , water-bone coatings are not hazardous goods. | ||||
| Shelf life | 6 months minimum at 25℃ , subject to re-inspection thereafter. | ||||
| Storage condition | Store in dry, cool conditions and storage temperature should be kept at 5~35℃ , away from sources of heat and ignition, containers must be kept tightly closed. | ||||
TECHNICAL DATA SHEET
No. | Items | Technical Data | ||||
1 | Component | two-component | ||||
2 | Color | Grey | ||||
3 | Mixing ratio | Base/Hardener=3/1(by weight) | ||||
4 | Volume solids (mixed) | about 70% | ||||
5 | Specific gravity | 2.75±0.05 | ||||
6 | Packing | A: 21kg/barrel; B: 7kg/barrel | ||||
7 | Hardness | 2H | ||||
8 | Adhesion | 1 level | ||||
9 | Impact | 50Kg · cm | ||||
10 | Typical film thickness | Dry: 60-80 μm/coat; Wet: 120-160 μm/coat | ||||
11 | Theoretical Coverage | 0.22 Kg/m2/60μm Various depending on environment, applications, etc. Allow appropriate loss factors. | ||||
12 | VOC | ＜30g/L, accord with EU Directive2004/42/EC, subcategory j. | ||||
| 13 | Complied standards | Complies with HG/T 4759-2014 and HJ 2537-2014. | ||||
14 | Flash point | None | ||||
